Samsung 460 Installation Manual page 21

¦ Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV set and upload the same settings to other TV sets.
All user-defined settings from the TV (Master Set) can be copied to the USB device.
• Cloning from TV to USB: This is an operation that copies the stored data from a
specific area of the TV EEPROM to the USB device.
1. Insert a USB drive into the USB port on the back of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 →
3. Press the ▲ or ▼ button to select "Clone TV to USB", then press the
button.
4. The message "Clone TV to USB" is displayed, then press the
5. You can check the status of the USB cloning operation.
• In Progress: While copying data to the USB device.
• Completed: The copy operation was finished successfully.
• Failed: The copy operation was not finished successfully.
• No USB: No USB device connected.
• Clone USB to TV: This is an operation that downloads the stored data to the USB
device to the TV set.
1. Insert a USB drive into the USB port at the back of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 →
3. Press the ▲ or ▼ button to select "Clone USB to TV", then press the
4. The message "Clone USB to TV" is displayed, then press the
5. You can check the status of the USB cloning operation
• In Progress: While copying data to the USB device.
• Completed: The copy operation was finished successfully.
• Failed: The copy operation was not finished successfully.
• No USB: No USB device connected.
• No File: There is no file to copy on the USB device.
✎ Activate copying from USB to TV by pressing
✎ The CLONE function only supports the same model series. (It does not work properly for different model series.)
For fast, instant cloning during installation,
insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
[HC460-465-EU]Install-Guide-X0ENG.indd 21
ENTER
ENTER
ENTER key for 5 seconds.
ENTER
ENTER button.
ENTER button.
ENTER button.
(ARC) ( (ARC) )
(5V 0.5A) (5V 0.5A) (5V 0.5A)
/ CLONING / CLONING / CLONING
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize OFF
21
English
2014-07-14 10:04:36