LG AN110B-JD Owner's Manual page 40

RS-232C
12. Color Temperature (ACC) (Command2:u)
➜ Adjust the color temperature.
Transmission
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data 0 : Normal 1 : Cool
Ack
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0 : Normal 1 : Cool
13. Low Power (Command1:j, Command2:q)
➜ To reduce the power consumption of the projector.
Transmission
[ j ] [q] [ ] [Set ID] [ ] [Data] [Cr]
Data 0 : Low Power Off(Normal)
1 : Low Power On(Silent)
Ack
[q] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0 : Low Power Off(Normal)
1 : Low Power On(Silent)
14. Auto Configure (Command1:j, Command2:u)
➜ To adjust picture position and minimize image
shaking automatically. It works only in RGB mode.
Transmission
[ j ] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data 1 : To set
Ack
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 1 : To set
40
2:Warm
2:Warm
15. Input Select (Command1:x, Command2:b)
➜ To select input source for the Set.
Transmission
[x] [b] [ ] [Set ID] [ ] [Data] [Cr]
Data 20 : Video
40 : Component
60 : RGB-PC
80 : HDMI(DVI)-PC
Ack
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 20 : Video
40 : Component
60 : RGB-PC
80 : HDMI(DVI)-PC
30 : S-Video
50 : RGB-DTV
70 : HDMI(DVI)-DTV
30 : S-Video
50 : RGB-DTV
70 : HDMI(DVI)-DTV