End call: End the current call.
n
Dialpad: Use the onscreen dialpad to enter additional numbers, for example, an extension or
n
access code.
For example: When you call your bank's 800 number, use your dialpad to enter your account
l
number and PIN.
Speaker: Route the phone's audio through the speaker (On) or through the earpiece (Off).
n
Activate Speaker to route the phone's audio through the speaker. (You can adjust the
l
speaker volume using the volume buttons.)
Deactivate Speaker to use the phone's earpiece.
l
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
Mute: Mute the microphone during an active call. Touch again to unmute the microphone.
n
Add call: Touch and hold to initiate a conference call (3-way call).
n
Note: If Mute is activated, the speaker mode is deactivated.
Caller ID
Caller ID identifies a caller before you answer the phone by displaying the number of the incoming
call. If you do not want your number displayed when you make a call, follow these steps.
Phone Calls
25