Clock And Alarm; Setting The Clock; Setting The Alarm; Setting The Sleep Timer - GPX HC225B User Manual

Remote
Clock & Alarm

Setting the Clock

1. With the unit powered off, press the Clock Set/Mem
button on the front of the unit, or the Clock/Sleep
button on the remote. The hour will begin flashing on
the display.
2. Press the Tuning buttons on the front of the unit, or the
Skip Rev/Fwd buttons on the remote to set the hour.
3. Press the Clock Set/Mem or Clock/Sleep button again.
The minutes will begin flashing on the display.
4. Repeat Step 2 to set the minutes.
5. Press the Clock Set/Mem or Clock/Sleep button again
to finish setting the time.

Setting the Sleep Timer

1. With the unit powered on, press the Clock/Sleep
button on the remote. The display will show the amount
of time in minutes before the timer goes off.
2. Press the Clock/Sleep button to select the amount of
time before the timer goes off: 90 minutes, 80, 70, etc.
3. Wait for the display to return to normal.
"Sleep" will be visible towards the bottom of the display
when the timer is on.
4. To turn the Sleep Timer off, perform Step 2 until the
display reads "OFF".
6
Power
Press to power the unit
on or off.
POWER
Source
CLOCK/SLEEP
Press to change the
media source.
REPEAT
Clock/Sleep
With the unit off, press
to set the clock.
RANDOM
Press to set
the sleep timer.
Repeat
Press to set an audio
track to repeat.
Random
Press to play audio
tracks at random.
Prog/Mem
Press to program
memory presets.
Mute
Press to mute the
volume.
SOURCE MUTE
Display
DISPLAY ALARM
Press to change the
display from media
to clock.
– +
MEM MEM
Alarm
Press to set the alarm.
PROG/MEM STOP
Mem -/+
Press to cycle through
radio memory presets.
Stop
Skip Rev/Fwd
Play/Pause

Setting the Alarm

1. With the unit powered off, press the Alarm button, on
the front of the unit, or the remote. The hour will begin
flashing on the display.
2. Press the Tuning buttons on the front of the unit, or the
Skip Rev/Fwd buttons on the remote, to set the hour.
3. Press the Alarm button again. The minutes will begin
flashing on the display.
4. Repeat Step 2 to set the minutes.
5. Press the Alarm button again to set the alarm type: The
alarm type will begin flashing on the display.
6. Repeat Step 2 to set the alarm type: Radio, CD or Buzzer.
7. Press the Alarm button again to finish setting the
alarm.
Cancelling/Deactivating the Alarm
1. After the alarm has sounded, press the Alarm button
to cancel it.
2. Press and hold the Alarm button to turn it off entirely.
The alarm indicator on the display will disappear.