Table of Contents
Advertisement
Wall Mounting the Repeater
You can mount the repeater directly to a wall using the horizontally
aligned mounting slots at the back of the repeater unit. Before doing
this consider the following:
Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into
the wall.
Mount the repeater within distance of a working 240V AC power
outlet.
Note! The Repeater unit is NOT waterproof. If mounted onto
an outside wall place under an eave or roof overhang where it
is protected from direct weather conditions, DO NOT place in
direct sunlight.
1.
Insert supplied two screws
into the wall, 60 mm apart.
(For best results, use a level
to ensure the screws are
even.) Remember to use
appropriate anchors for the
wall material.
2.
Keeping the AC adapter
cord out of the way, place
the repeater over the screw
heads and slide it down into
place.
Desk Mount the Repeater
You can also desk mount the repeater by
inserting the desk mount stand into the slots
at the back of the unit.
3mm
60mm
6
27.5mm
Advertisement
Table of Contents
