Phylink PLC-325PW Bullet HD Quick Install Manual page 4

Power Connector
Connects to the included DC 12V power adapter.
Reset/WPS Button
Short press this button to setup a wireless connection automatically.
Press and hold this button for 5 seconds to reset the camera.
Note that all settings will be restored to factory default.
Status indicator LED
After camera is powered on, the indicator LED shows yellow light and quickly off
which means the system is being started. When the indicator LED shows yellow
again, it means the system has started successfully.
Red light is for wired connection and WPS status, yellow light for wireless connection.
The indicator LED flashes during data transfer.
Light sensor
Monitors lighting conditions and switches
between color and infrared accordingly.
Micro SD Card slot
Local storage for storing recorded image
and video.
Wrench on Mount Bracket
You can screw the wrench on the mount bracket to lock it.
The design of wrench on the bracket makes you easily screw the mount bracket without
any extra tool.
PHYLINK Bullet HD Quick Install Guide