Network Groups - Nokia E52 User Manual

Phone 77

Network groups

Network groups consist of pre-configured lists of members that are stored on the server.
You can define participants by adding them to the member list. When you want to talk
to a network group, you can select the group, and make a call to it. The server calls each
participant in the group, and the call is ready when the first participant answers.
To make a call, select Options PTT contacts Netw. grps./ channels, open the PTT
> >
groups tab, select a group, and press the PTT key.
Create a channel group
To create a new configured network group or channel, select Options Create new,
>
PTT network group, or PTT channel.
You can create your own public channels, choose your own channel name, and invite
members. Those members can invite more members to the public channel.
You may also set up private channels. Only users invited by the host are allowed to join
and use private channels.
For each channel, define Network group name, Nickname, and Thumbnail (optional).
When you have successfully created a channel, you are asked if you want to send channel
invitations. Channel invitations are text messages.
Talk to a channel or group
To talk to a channel after you log in to the PTT service, press the PTT key. A tone sounds,
indicating that access is granted. Continue to press and hold the PTT key the entire time
you are talking. When you finish talking, release the key.
If you try to respond to a channel by pressing the PTT key while another member is
talking, Wait is displayed. Release the PTT key, wait for the other person to finish
talking, and press the PTT key again. Alternatively, press and hold the PTT key, and wait
for Talk to be displayed.
When you are talking in a channel, the first person to press the PTT key when someone
stops talking can talk next.
To view the currently active members of a channel during an active call to the channel,
select Options Active members.
>
When you have finished the PTT call, select Disconnect.