Change Audio Themes; 3-D Ringing Tones - Nokia E52 User Manual

36 Personalisation

Change audio themes

You can set sounds for various device events. The sounds can be tones, speech, or a
combination of both.
Select Menu Ctrl. panel
>
To change the current audio theme, select
To add 3-D effects to the audio theme, select
To create a new audio theme, select
To set a sound for an event, select an event group, such as Messaging events. Select the
desired event and from the following:
Silent — Deactivate the sound of the device event.
Tone — Set a tone as the sound for the device event.
Speech — Set a synthesised voice tag as the sound for the device event. Enter the
desired text, and select OK.
Select an event group, such as Messaging events. Select the desired event, Options, and
from the following:
Play — Play the sound before activating it.
Activate sounds — Activate all the sounds in the event group.
Deactivate sounds — Deactivate all the sounds in the event group.

3-D ringing tones

Select Menu Ctrl. panel
>
To enable three-dimensional (3-D) sound effects for ringing tones, select
tone effects > On. Not all ringing tones support 3–D effects.
To change the 3–D effect that is applied to the ringing tone, select
and the desired effect.
To modify the 3–D effect, select from the following:
Trajectory speed — Select the speed at which sound moves from one direction to
another. This setting is not available for all effects.
Reverberation — Select the desired effect to adjust the amount of echo.
Doppler effect — Select
to your device, and lower when you are farther away. This setting is not available for
all effects.
Themes and Audio
>
Options
3-D tones.
>
On to set the ringing tone sound higher when you are closer
themes.
Active audio theme.
Options 3-D ringing
>
Save theme.
>
tones.
3-D ringing
Sound trajectory