Nokia E52 User Manual page 142

142 Connectivity
6 Select the device with which you want to connect. If the other device requires
pairing before data can be transmitted, you are asked to enter a passcode.
When the connection has been established,
The Sent folder in the Messaging application does not store messages sent using
Bluetooth connectivity.
To receive data using Bluetooth connectivity, select
visibility Shown to all
>
data from a paired device only. When you receive data through Bluetooth connectivity,
depending on the settings of an active profile, a tone sounds, and you are asked if you
want to accept the message in which the data is included. If you accept, the message
is placed in the Inbox folder in the Messaging application.
Tip: You can access the files in the device or on the memory card using a compatible
accessory that supports the File Transfer Profile Client service (for example, a laptop
computer).
A Bluetooth connection is disconnected automatically after sending or receiving data.
Only Nokia PC Suite and some accessories such as headsets may maintain a connection
even if not actively used.
Pair devices
Select Menu Ctrl. panel
>
Open the paired devices tab.
Before pairing, decide on your own passcode (1-16 digits), and agree with the user of
the other device to use the same code. Devices that do not have a user interface have a
fixed passcode. You need the passcode only when you connect the devices for the first
time. After pairing, it is possible to authorise the connection. Pairing and authorising
the connection makes connecting quicker and easier, as you do not have to accept the
connection between paired devices every time you establish a connection.
The passcode for remote SIM access must have 16 digits.
In remote SIM mode you can use your device's SIM card with compatible accessories.
When the wireless device is in the remote SIM mode, you can only use a compatible
connected accessory, such as a car kit, to make or receive calls.
Your wireless device will not make any calls, except to the emergency numbers
programmed into your device, while in this mode.
to receive data from a non-paired device or
Connectivity
>
Sending data is displayed.
Bluetooth
> Bluetooth.
On and My phone's
>
Hidden to receive