Problems And Possible Solutions - Mirage 6678 User Manual

Problems and Possible Solutions

Problem
You turned on the power but it doesn't
work.
The battery LED power indicator
blinking orange.
You are losing battery power too quickly.
Actual battery operating time is shorter
than expected.
You are setting the computer up for the first time and trying to power the
computer from the battery only. You should power the computer from the AC/
DC adapter when first setting up the computer. As a safeguard during
shipping, the battery will be locked and will not power the computer until first
connected to the AC/DC adapter.
, is Low Battery. Plug in the DC power source. If the computer doesn't start up
immediately, turn it off then on again.
The system is using too much power. If your OS has a Power Options scheme
(see "Power Plans" on page 3 -
peripheral device/USB device that is drawing a lot of power.
The battery has not been fully discharged before being recharged. Make sure
the battery is fully discharged and recharge it completely before reusing (see
"Battery Information" on page 3 -
Power Options have been disabled. Go to the Control Panel in Windows and
re-enable the options.
A peripheral device/USB device is consuming a lot of power. Turn off/remove
the unused device to save power.
Possible Cause - Solution
5) check its settings. You may also be using a
14).
Problems and Possible Solutions 8 - 7
Troubleshooting
8