Removing the Component Bay Cover - Model B
1.
Turn off the computer, and turn it over and remove the battery (see page
2.
Remove screws
&
1
3.
Lift the component bay cover off the computer case by applying pressure at points
&
; if you have problems using a finger to do this, then use a non-abrasive,
3
4
non-sharp object (e.g. a coin) to lift the cover up before removal).
4.
Remove the component bay cover
from the bottom of the computer.
2
.
5
3
1
Removing the Component Bay Cover - Model B 6 - 5
6 -
4
2
5
Upgrading The Computer
3).
Figure 6 - 3
Removing the
Component Bay
Cover
(Model B)
6