Camera App - Mirage 6678 User Manual

Camera App

1. Run the Camera app from the Start screen by clicking on the Camera app icon
.
2. The camera interface will display two buttons on the right side of the screen.
3. The upper button
to take still pictures.
4. Right-click on the screen to bring up menu buttons at the bottom of the screen.
5. These buttons enable you to access the camera roll (where captured pictures and
video are displayed), set the timer (the time period before capture begins; 3
seconds, 10 seconds or Off) and set the exposure level using the slider to obtain
the best results.
is used to record video, and the lower button
Modules & Options
Figure 7 - 2
Camera App
Buttons

Exposure
Use the slider to adjust
the Exposure level.
is used
Figure 7 - 3
Camera Options
PC Camera Module 7 - 5
7