8. Do not use any attachment(s), and/or item(s) or make any modifications that are not explicitly approved by Behmor Inc. in, on or to the Behmor Brazen. Using such items or making modifications is strictly prohibited and automatically voids all warranties and relieves Behmor Inc. of any/all liabilities arising from such misuse and tampering.
Page 3
Start Button: For starting the brewing cycles and calibration. * Power Saving Sleep Cycle: The Brazen is programmed with a Power Saving Sleep Cycle. After 5 minutes of inactivity the system will go into this mode and the screen will dim. Press any button to bring the brewer out of this mode.
Page 4
Programming Your Brazen The Brazen comes with default settings that are appropriate for brewing. Pre-Soak 15 seconds, Brew Temperature 208° F (98° C), and Altitude of 0 Ft. You can exit the programming modes at any point by hitting the “On/Off” button.
Controlled Temperature Glide programming. 2. Remove the filter basket, and place ground coffee into the filter. A full pot of brewed coffee in the Brazen requires 8-10 Tablespoons of ground coffee (60-70 grams or 2 oz). If the Brazen’s gold filter is being used, finely ground coffee is not recommended as it may clog the filter.
3) To turn off the Automatic Timer, press “Auto” again or “On/Off”. c. Brew using Manual Release: 1) Place either the Brazen carafe, a Chemex, a press pot or other open brewing container on the base of the brewer. If using anything but the carafe, remove the brew basket and filter.
Page 7
Important Tips for Great-Tasting Coffee Coffee: The quality of the coffee used is directly related to the quality of the cup brewed in the Brazen Brewer. The Brazen is, we believe, the finest brewer in existence but it can only deliver quality equal to the coffee itself. We highly recommend buying freshly roasted (under 3 days old) whole bean coffee where possible and supply a list of artisan small batch roasters who we feel deliver quality coffees.
Press any key to bring it out of this Saver mode. This is normal. mode. E1 – E6 One of the sensors has broken. Contact Behmor Technical Support. The reservoir went dry while Turn the system off. Allow to cool for 5 minutes. Turn on, add water heating.
Updates posted on the Behmor Inc. website located at www.behmor.com are not covered under the limited warranty. If you believe you have a warranty claim within the FIRST 30 days of the purchase date, please contact Behmor Inc. for a return label, a return authorization or a new part(s) to replace the defective one(s).
Need help?
Do you have a question about the Brazen and is the answer not in the manual?
Questions and answers