Connections And Settings; Connecting To A Tv - Panasonic DMP-BDT271 Operating Instructions Manual

Connections and settings

Connecting to a TV

Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
[BDT271/270]
[BDT175/174/171/170]
[BDT271/270]
[BDT175/174/171/170]
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable. When outputting 1080p or
24p (4K) signal, please use HDMI cables 5.0 meters or less.
[BDT175/174/171/170]
≥ This unit consumes a small amount of AC power (
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
The unit is in the standby condition when the AC adaptor is connected. The primary
≥
[BDT166/165] [BD833/83]
circuit is always "live" as long as the AC adaptor is connected to an electrical outlet.
Connections and settings
[BDT166/165]
[BD833/83]
HDMI cable
AC adaptor (supplied)
AC mains lead (supplied)
34) even when turned off in standby mode. For
- 10 -
HDMI IN
[BDT166/165]
[BD833/83]
To a household mains
socket
[BDT271/270]