Connections And Settings; Connecting To A Tv; Connecting To An Amplifier/Receiver - Panasonic DMP-BDT465 Operating Instructions Manual

Connecting to a TV

Connections and settings

Connect the AC mains lead after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic's HDMI cable. When outputting 1080p or 24p (4K) signal,
please use HDMI cables 5.0 meters or less.
To a household mains
socket
AC mains lead (supplied)
≥ [BDT465] [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ This unit consumes a small amount of AC power (
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.

Connecting to an amplifier/receiver

Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
HDMI AV OUT
[BDT465]
[BDT460]
[BDT365]
[BDT364]
[BDT363]
[BDT361]
[BDT360]
≥ [BDT465] [BDT460] : Use HDMI AV OUT MAIN terminal.
≥ Set "Digital Audio Output" (
≥ When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then
connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up to
5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of "(ARC)"
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV's sound through the amplifier/receiver.
Connections and settings
[BDT465]
[BDT460]
[BDT365]
[BDT364]
[BDT363]
[BDT361]
[BDT360]
HDMI cable
27).
- 10 -
HDMI cable
36) even when turned off in standby mode. For
HDMI cable
HDMI OUT
HDMI IN
(ARC)
Amplifier/receiver
HDMI IN
HDMI IN
(ARC)