Turning On The Monitor - LG MT-42PZ40B Owner's Manual

Caution
• When installing the monitor vertically, you have to change the menu display mode so that the menus will appear
correctly and also to protect the monitor from overheating (Refer to p. 17).
• Install this monitor only in a location where adequate ventilation is available.
To Mount on a Wall
Wall mount minimum allowable clearances for
adequate ventilation.
4 inches
4 inches
4 inches

Turning on the Monitor

- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
1. Connect power cord correctly.
2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to
standby mode. Press the INPUT SELECT button on the Monitor or press the POWER,
INPUT SELECT button on the remote control and then the Monitor will switch on.
Turning on the Monitor (power cord is still connected)
1. If the Monitor was turned off with the
• Press the ON/OFF button on the Monitor to turn the Monitor on.
2. If the Monitor was turned off with the remote control and the ON/OFF button on the Monitor
• Press the ON/OFF button on the Monitor and then press the INPUT SELECT button on the
Monitor or press the POWER, INPUT SELECT button on the remote control to turn the Monitor on.
14
To Install on a Desktop
Pedestal mount minimum allowable clearances for
adequate ventilation.
2 inches
4 inches
ON/OFF button on the Monitor
4 inches
4 inches 4 inches
2.36 inches
2 inches