Avantgarde TBWC-110S2 Instruction Manual page 20

ON/OFF POWER
To turn ON/OFF the appliance, press the ON/OFF button.
SETTING THE TEMPERATURE CONTROL
Each cooling compartment of the wine Cooler (upper & lower) is independently controlled. To set the
temperature: Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings are automatically saved and each compartment will keep the previous
temperature setting. The temperature preset at the factory is 6° C for the upper compartment and 12° C for the
lower compartment.
Set the desired cooling temperature by pressing the corresponding buttons
program. Each depression of the buttons will scroll through the available temperature settings (for each
compartment) in increments of 1 degree. The temperature selected will flash in the LED display for
approximately 5 seconds, then will revert back and display the temperature inside the cabinet.
Upper compartment
The temperature setting can be adjusted from 5° C to 10° C (40° F to 50° F).
Lower compartment
The temperature setting can be adjusted from 10° C to 18° C (50° F to 65° F).
To view the "set" temperature press and hold the corresponding button for approximately 5 seconds, the "set"
temperature will temporarily "flash" in the LED display for 5 seconds.
This unit has the option to display temperatures in either Celsius or Fahrenheit. To change the setting, press and
hold both buttons (Set Upper/Set Lower)
sound and the blue pilot light adjacent to the 0℃ mode illuminates.
Cooling
Indicator light illuminates to signify the cooling mode is currently in operation.
8/4/2011
simultaneously for approximately 5 seconds, a prompt (beep) will
20
for "set upper / set lower"