Download Table of Contents Print this page

Connecting A Personal Computer; Connecting A Dvd Player Or Computer With Hdmi Out; Connecting A Computer With Displayport - NEC MultiSync X464UN User Manual

Large format display
Hide thumbs Also See for MultiSync X464UN:


Table of Contents

Connecting a Personal Computer

Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
Some display cards may not display an image correctly.
Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically.
<Typical factory preset signal timing>
Scanning frequency
640 x 480
31.5 kHz
800 x 600
37.9 kHz
1024 x 768
48.4 kHz
1280 x 768
48 kHz
1360 x 768
48 kHz
1280 x 1024
64 kHz
1600 x 1200
75 kHz
1920 x 1080
67.5 kHz
If you use with a Macintosh PowerBook, set "Mirroring" to Off on your PowerBook.
Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any
special identifi cation or confi guration your monitor's image and monitor may require.
Input TMDS signals conforming to DVI standards.
To maintain display quality, use a cable that conforms to DVI standards.

Connecting a DVD Player or Computer with HDMI out

Please use an HDMI cable with HDMI logo.
It may take a moment for the signal to appear.
Some display cards or drivers may not display an image correctly.
When you use a computer with HDMI out, please set OVER SCAN to "OFF" (see page 28).

Connecting a Computer with DisplayPort

Please use DisplayPort cable with DisplayPort compliance logo.
It may take a moment for the signal to appear.
Please note that when connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not
Select DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
Compressed image
60 Hz
Recommended resolution


Table of Contents

Table of Contents