Installation And Connections; Installation Of The Unit - Pioneer PDP-503MXE Operating Instructions Manual

Installation and Connections

Installation of the Unit

Installation using the supplied display stand
Be sure to fix the supplied stand to the installation
surface.
Use commercially available M8 bolts that are 25 mm
longer than the thickness of the installation surface.
1 Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
Front
110 mm
2 Set this unit in the stand.
8
En
798 mm
Rear
3 Fix this unit using the supplied washer and bolt.
CAUTION
Because this unit weighs about 40 kg and the lack of depth
makes it fairly unstable, please use 2 people or more when
packing, carrying or installing.
Use a 6 mm hex wrench
to bolt them.