Vcr Setup / Cable Tv Setup - LG 60A Owner's Manual

Installation
NOTE: All cables shown are not included with the TV
VCR Setup VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may
remain visible on the screen.
Connection Option 1
Set VCR output switch to 3 or 4 and then tune
TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
3. Select the input source with using the
TV/VIDEO button on the remote control. (If
connected to A/V INPUT 1, select Video 1
input source)
Do not connect to both Video and
S-Video at the same time.
Cable TV Setup
Cable TV Setup
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on cable
box.
2. Tune the TV channel to the same selected
output channel on cable box.
3. Select channels at the cable box or with the
cable box remote control.
Connection Option 2
1. Connect the audio and video cables from the
Cable Box's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to a Cable Box,
match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red).
2. Select the input source with using the
TV/VIDEO button on the remote control. (If
connected to A/V INPUT 1, select Video 1
input source)
3. Select your desired channel with the remote
control for cable box.
12 Plasma TV
DVI
OUTPUT
INPUT
Antenna 1 Antenna 2
RGB INPUT AUDIO INPUT DVI INPUT
DIGITAL AUDIO
(OPTICAL)
1
ANT OUT
S-VIDEO
OUT
ANT IN
OUTPUT
SWITCH
3 4
IN
DVI
OUTPUT
INPUT
Antenna 1 Antenna 2
RGB INPUT AUDIO INPUT DVI INPUT
DIGITAL AUDIO
(OPTICAL)
1
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
TV
3 4
RF Cable VCR
Cable Box
AUDIO INPUT VIDEO INPUT
AUDIO VIDEO
R L R L
COMPONENT1
MONITOR
INPUT
COMPONENT 2
DVD OUTPUT
/DTV
INPUT
A/V
S-VIDEO
COMPONENT 1
INPUT1
(MONO)
2
VCR
(R) AUDIO (L) VIDEO
AUDIO INPUT VIDEO INPUT
AUDIO VIDEO
R L R L
COMPONENT1
MONITOR
INPUT COMPONENT 2
DVD OUTPUT
/DTV
INPUT
A/V
COMPONENT 1 S-VIDEO
INPUT1
(MONO)
2
RS-232C INPUT
REMOTE
(CONTROL/SERVICE) CONTROL
RS-232C INPUT
REMOTE
CONTROL
(CONTROL/SERVICE)