Table of Contents
Advertisement
Installation | Step 3
Charging the Headset
Each headset comes pre-charged with enough battery
power for at least 10 minutes of use. The headset
will last around 6 - 8 hours on a full charge, but will
decrease as the volume reaches higher levels. A fully
exhausted battery will take between 8 - 10 hours
to charge completely. The 1 hour "Quick Charge"
feature will rapidly charge a partially drained battery
sufficiently for typical use, which is around 2 to 4 hours.
1. Turn the headset volume knob to the off position.
You will hear and/or feel a click when it has been
turned all the way into the off position.
2. Place the headset in the transmitter-charging cradle
facing forward.
3. Check to see that the charging lights illuminate. The
left charging light will illuninate if there is a headset
in the front cradle and the right charging light will
illuninate if a headset is in the rear charging cradle.
We recommend storing the headset in the charging
cradle of the transmitter when not in use to avoid
damaging the headset. Remember, the headset needs
to be turned off when not being used and it cannot be
over-charged.
7
Advertisement
Table of Contents
