Compact Disc Player - Ford ECOSPORT Owner's Manual

Under certain conditions, however,
alternative frequencies tuning may
temporarily disrupt normal reception.
When selected, the unit continually
evaluates signal strength and, if a better
signal becomes available, the unit will
switch to that alternative. It mutes while
it checks a list of alternative frequencies
and if necessary, it will search once across
the selected frequency band for a genuine
alternative frequency.
It will restore radio reception when it finds
one or if one is not found, the unit will
return to the original stored frequency.
When selected, AF will be shown in the
display.
1. Press the MENU button.
2. Select AUDIO SETTINGS.
3. Scroll to ALTERNAT FREQ. or
ALTERNATIVE FREQ. and turn on or off
with the OK button.
4. Press the MENU button to return.
Regional Mode
The regional mode controls the behavior
of switching between alternative
frequencies list of regional networks of a
station. The station can maintain a fairly
wide network coverage over a large part
of the country. At various times of the day
this large network can be separated into
several smaller regional networks, typically
centralized in major cities or areas. When
the network is not divided into regional
variants, the entire network broadcasts the
same programming.
Regional mode ON: This prevents random
alternative frequency switches when
neighboring regional networks are not
carrying the same programming.
Ecosport (CBW) India
Audio System
Regional mode OFF: This allows a larger
coverage area if neighboring regional
networks are carrying the same
programming, but can cause random
alternative frequency switches if they are
not.
1. Press the MENU button.
2. Select AUDIO SETTINGS.
3. Scroll to RDS REGIONAL and turn on
or off with the OK button.
4. Press the MENU button to return.

COMPACT DISC PLAYER

Compact Disc Playback
Note: During playback, the display indicates
the disc, track and time that have elapsed
since the start of the track.
During radio reception, press CD once to
start CD playback.
After a disc is loaded, playback starts
immediately.
Track Selection
• Press the seek down button once to
replay the current track. If pressed
within two seconds of the start of a
track, the previous track plays.
• Press the up or down arrow buttons to
select the required track, then press
OK.
You can select a track by using the numeric
keypad. Dial the required track number
until complete (for example, 1 then 2 for
track 12), or dial the number and directly
press OK.
Fast Forward and Reverse
Press and hold the seek down or up
buttons to search backward or forward
within the tracks on the disc.
159