CONCORD RM-08 User Manual page 3

Hand-held remote control transmitter
Table of Contents

Advertisement

Screw (3)
Molex
Switch
Housing
Figure 1A
Screw (3)
Blue Wire
Pigtail
Connector
Switch
Housing
Figure 1B
Molex Plug
Connector
WHITE Module
RED
Wire
Wire
BLUE Lite
Kit Wire
from Molex
WHITE Lite
Kit Wire
BLUE Lite Kit
Wire from Molex
Figure 2
WARNING:
For fans with uplighting or lighted motor housing, before disconnecting fan to install
Remote Control, turn all lights on HIGH.
Mounting
Plate
STEP 1
The Switch Housing has three (3) screws around the top. Loosen the 3 screws. Rotate the Switch
Housing Unit to the left and remove. Unplug the Molex connector (see figure 1A). If you have
a light kit already attached to the fan, you may leave it attached. Simply remove the wire nuts
and disconnect the wires to the light kit. If you are installing a light fixture to the fan, do this now
according to the instructions supplied with the light kit. Do not however, connect any of the light
kit wires at this point.
NOTE: If your fan has uplight or motor center band lighting you will
have to unplug pigtail connector also (see figure 1B).
You will find 2 capacitors in your kit. Choose the capacitor that corresponds
with your fan model name (see chart below) then proceed to Step 2.
Mounting
Plate
Molex
Pigtail
RED Wire
WHITE Wire
Fan With
Uplight only
STEP 2
Make the following connections and place RM-08 wire bundle into the empty switch
housing. Remove paper backing from stickers to secure reverse module and capaci-
Capacitor
tor to the bottom of the shell (see figure 2).
Reverse
CONNECTIONS (see figure 2):
Module
-Attach the WHITE Module wire to the WHITE (Un-marked) Capacitor wire.
-Attach the RED wire from Molex plug to the RED Capacitor wire.
-If your fan has a light kit attached, connect the BLUE Lite Kit to the BLUE Molex
plug wire and the WHITE Lite Kit wire to the WHITE Module wire.
Switch Housing Unit
-If no light is installed, the second WHITE Capacitor wire (marked "For Light")
remains unconnected.
FAN
CAPACITOR
"All About Looks"
Aracruz
Bamboo Breeze
Boardwalk
(indoor only)
Calavera
California
Capetown
Corinthian
Decorama( ")
Designer Gallery
Dynasty
Eden
Elements
Fernleaf Breeze
Florence
Formosa
French Quarter
Grandeville
Grecian Isle
Hearthside ( ")
Hillsboro
Ivory Coast
Le Cage
Madison
Navigator
New Yorker
- 3 -
FAN
Palmleaf Breeze
Portofino
Ponderosa
Quarry Breeze
Ready Loc
Roman Isle
Roosevelt
Sheraton
Vineyard
Visionaire
Voyager
Windsor
Windswept
Winford
CAPACITOR

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for CONCORD RM-08

Table of Contents