Samsung HT-H7500WM User Manual page 23

You can get the network parameter values
✎
from your Internet provider.
When finished entering all the parameter
7.
values, select Ok, and then press the
button. The home cinema verifies the
network connection and then connects to
the network.
Wireless Network
You can set up a wireless network connection in
three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network
devices currently connected to the product
or, if applicable, the product's current wired
connection.
Wireless - Automatic
Ğ
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 22:
In the Network Settings screen, change
1.
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
si-ap
iptime
kIMING_vTOWER
Refresh WpS(pBC)
Select the desired network, and then press
2.
the button.
Ok
On the Security screen, enter your network's
3.
security code or pass phrase.
Enter letters by selecting a letter with
78:; buttons, and then pressing
button.
When finished, select done, and then press
4.
the button. The product verifies the
Ok
network connection and then connects to
the network.
✎
Ok
Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 22:
1.
2.
3.
4.
you can connect your Blu-
ray player to the internet.
5.
please select which wireless
network to use.
Ok
6.
23
- English
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
Scroll through the list, select the desired
network or Add Network, and then press the
button.
Ok
If you selected a network in Step 2, go to
Step 6.
If you selected Add Network, go to Step 4.
Enter your wireless network or wireless
router's name.
~ Enter letters by selecting a letter with the
78:; buttons, and then pressing the
button.
Ok
~ To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select , and then press the
~ To display symbols and punctuation, select
123#&, and then press the
redisplay letters, select 123#&, and then
press the button.
Ok
When finished, select done, and then press
the button.
Ok
On the Security type screen that appears,
use the ,. buttons to select the network's
Security type, and then press the
On the next screen, enter your network's
security code or pass phrase.
~ Enter letters by selecting a letter with the
78:; buttons, and then pressing the
button.
Ok
When finished, select done, and then press
the button. The product searches for the
Ok
network.
The Network connection fail screen appears.
Use :; buttons to select Ip Settings, and
then press the Ok button.
button.
Ok
button. To
Ok
button.
Ok