Table of Contents
Advertisement
6.14.6
Image Centre Reticule
This will put a Cross Hair in the center of the image. This can be used to assist in
aligning multiple cameras onto the same target object.
6.15 Advanced Tools
6.15.1
Auto Trigger
Only on SC Series
Auto Trigger allows you to specify a region in the live image from the camera which
will be monitored by the software. If this portion of the image changes above a
defined threshold level, it will cause the camera to automatically TRIGGER a
recording.
NOTE :
There will be some latency between the image change and the trigger
command. This tool should be used ONLY when an approximate trigger time is
required. For an accurate Trigger you should use the trigger IN BNC connection.
To minimize this latency when using a colour camera, in particular a colour HotShot
MEGA camera, it is recommended that you make use of the SPEED BOOST function
(see 6.7.1).
HotShot SC User Manual
Jimmy Robinson
Rev 1.2.5 –March 2012
47
© NAC Image Technology Inc
Advertisement
Table of Contents
