Power Supply - bca Tracker3 Owner's Manual

Familiarization
Adjustment/Fitting
Tracker3 can be worn with or without its harness. When used with a
harness, Tracker3 should be worn underneath your outer garments,
as shown in Figure D.
Figure D
Waist Attachment Buckle
Lanyard Attachment Loop
Distance/directional display should be against your body and transmit light
should be exposed and visible.
To search, remove Tracker3 from its pouch, but keep the harness on and
lanyard attached. If using without a harness, keep Tracker3 in a secure
pocket, preferably in your pants or other garment that won't be removed
while traveling in the backcountry. Attach the lanyard clip to a zipper or
other solid fixture. If the lanyard is removed from harness or clothing for
searching, keep it attached to your wrist with the loop provided.

Power Supply

Tracker3 operates with three AAA alkaline batteries. Use only high-quality
alkaline batteries of identical age and brand. Do not use rechargeable,
lithium, Oxyride, PowerPix or any other non-alkaline battery. Replace with
fresh batteries at the beginning of every season.
If Tracker3 is exposed to excessive moisture, open the battery door
to help allow the unit to dry. To prevent corrosion of contacts, remove
batteries during extended periods of inactivity. The manufacturer does not
warranty damage caused by battery corrosion.
8
Waist Strap
Shoulder Strap
Lanyard
m