Emerson SmartSet CKS9005 Owner's Manual page 8

Setting The Time, The First Time
IMPORTANT: The first time you connect your new SmartSet
internal computer will automatically set the time correctly for the Eastern Time Zone, which is the
initial default setting. The display will scan for a few seconds and then show the correct Time, Day
and Year in the Eastern zone. If you live in the Eastern Time zone, there is nothing else to do.
Your clock is set correctly and running. If you do not live in the Eastern Time zone you must
change the default zone display to your own zone. You only do this one time and the SmartSet
will remember the new default zone setting and will always return to that setting after a power
interruption.
There are 7 time zones programmed into your SmartSet
ZONE 1 -- Atlantic Time
ZONE 2 – Eastern Time (Default setting)
ZONE 3 -- Central Time
ZONE 4 – Mountain Time
To change the default time zone display, press the TIME ZONE button.
The number "2" will appear on the display indicating that the default zone
is ZONE 2, Eastern Time.
Hold the TIME ZONE button and then press either the SET
button until your own time zone appears on the display, then release these buttons. The clock
display will change to the correct time in the time zone you selected. The clock will always return
to the correct time in the zone you selected after every power interruption.
If you move to a different time zone, simply change the default zone display to the new zone and
®
the SmartSet will remember that setting for you.
Date Display
To see the correct date at any time, press the MONTH/DATE button. The display changes from
time to Month and Date (MM/DD).
For example, JUN 6
appear in the display at the same time. When you release the
MONTH/DATE button, the display return to the correct time.
Year Display
To see the correct year, press the MONTH/DATE and TIME buttons together.
The display changes from time to year.
When you release the MONTH/DATE and TIME buttons the display returns to the correct time.
Daylight Savings and Leap Year Adjustments
All Daylight Savings and Leap Year adjustments are made automatically by the SmartSet
computer as follows:
Start of Daylight Saving Time:
At "2:00 AM" on the 2nd Sunday in March, the clock will automatically advance to "3:00 AM".
End of Daylight Saving Time:
At "3:00AM" on the 1st Sunday in November, the clock will automatically reset to "2:00 AM".
Leap Year:
At "12:00 Midnight" on February 28th, the calendar display will change to "2.29".
OPERATING INSTRUCTIONS
th
will appear as "6. 6", and the day of week will
®
clock radio to the AC outlet the
®
clock radio as follows:
ZONE 5 – Pacific Time
ZONE 6 – Yukon Time
ZONE 7 – Hawaiian Time
or
7
®
®
internal