® SmartSet Triple Display, Dual Alarm Clock Radio with Indoor and Outdoor Temperature Sensors. (U.S. Patent No. 6,567,344) OWNER’S MANUAL CKS9005 CKS9005BK Visit our web site at www.emersonradio.com...
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREWENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead The exclamation point within an equilateral WARNING: TO REDUCE THE RISK OF...
We have taken every precaution to make sure this radio was in perfect working order when it left our factory. If you encounter any problems with the set up or operation of this item, please call the Emerson Consumer Products Corp., Customer Service Hotline, toll free, at 1-800-898-9020.
IMPORTANT NOTES • • Avoid installing this unit in places Operate controls switches exposed to direct sunlight or close to described in the manual. • heat radiating appliances such Before turning on the power, make electric heaters, on top of other stereo certain that the AC power cord is equipment that radiates too much heat, properly installed.
Protect Your Furniture This model is equipment with non-skid rubber ‘feet’ to prevent the product from moving when you operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’...
LOCATION OF CONTROLS AND INDICATORS Top Panel Side Panel Front Panel...
Back Panel Wireless Thermo Sensor Bottom Panel 1） RADIO ON/OFF Button 20) INDOOR TEMPERATURE Display TIME Setting Button 21) DAY OF WEEK Indicators (MON, TUE, MONTH/DATE Setting Button WED, THU, FRI, SAT, SUN) TIME ZONE Button 22) TIME/DATE Display Button 23) OUTDOOR TEMPERATURE Display Button 24) AUX Indicator...
OPERATING INSTRUCTIONS Setting The Time, The First Time ® IMPORTANT: The first time you connect your new SmartSet clock radio to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting.
Manual Time Adjustments Some people like to set their clocks 5 to 10 minutes fast to make sure that they will always be on ® time. Even though the SmartSet sets the time by itself, you still have the option of adjusting the time manually if you wish.
To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button and press the MODE button until the DAY OF WEEK indicators show the desired mode setting, Weekdays only, Weekends only, or Everyday operation. Release the MODE and ALARM 1 setting buttons, the display will return to the correct time. Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary.
Wake To RADIO 1. Turn the radio ‘On’ and select the band, station, and volume level that you wish to hear when the alarm comes ‘On’, then turn the radio ‘Off” again. 2. Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms.
Sleep To The Radio or Music Timer You can program the sleep timer to play the Radio or AUX IN for up to 90 minutes and then shut ‘Off’ automatically. 1. Press the SLEEP button. The display will briefly show “10” and the Radio or AUX IN will begin to play. After 10 minutes the Radio or AUX IN will shut off automatically.
When the battery power drops below a certain level, the LOW BATT. Indicator (Main display) will ‘flash’. When you see this indicator, you should change the battery as soon as it is convenient for you to do so. To change the battery proceed as follows: 1.
Resetting The Clock After A Total Memory Loss If you do not change the built in lithium battery within a reasonable period of time after you see the (main display) warning indicator, the lithium battery may become exhausted and will no ®...
Using AUX IN Jack to enjoy your iPod, MP3 or other audio source This clock radio is equipped with AUX IN Jack to enjoy your iPod, MP3 player music or other audio source. 1. Turn on the clock radio by pressing the RADIO ON/OFF button. 2.
5. The receiving indicator “ ” will blink on the outdoor temperature display. NOTE: The receiving indicator “ ” will blink for 3 minutes until receiving the wireless Thermo Sensor code, it will stop blinking once the code is received. The temperature will then be displayed. If the receiving indicator “...
TROUBLE SHOOTING GUIDE Symptom Possibility causing/suggestion Indoor or outdoor temperature display shows up If the indoor or outdoor temperature is below “LL”. –15 C / 5 F, “LL” shows. This is not an error. Indoor or outdoor temperature display shows up If the indoor or outdoor temperature is over “HH”.
CARE AND MAINTENANCE Care Of Cabinets If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet.
For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $9.00 to cover shipping and handling costs, and enclose a copy of your proof of purchase.