Installing This Software - Panasonic WJ-ND200 Operating Instructions Manual

Installing This Software

Install this software as follows after completing the network settings of the network disk recorder and PC.
Step 1
Insert the provided CD-ROM into the PC disk drive.
Step 2
Double click "setup.exe" in the "Admin" folder.
The confirmation window will be displayed.
Step 3
Click the "OK" button and follow the installation wizard to install this software.
The "WJ-ND200 Administrator Console" folder will be created (C:\Program Files\Panasonic\WJ-ND200/WJ-ND200
Administrator Console) and the necessary files will be copied in it.
When installation is complete, the application will be added to "Programs" in "Start" and the shortcut will be created
on the desktop.
Important:
Do not edit, remove, or move the directory path of the files above. Otherwise, this software may not function
properly.
6
Notes:
• If Microsoft .NET Framework 1.1 is not installed on a
PC, it will be installed automatically when installing
this software.
It is possible to check with "Control Panel" whether
Microsoft .NET Framework 1.1 is installed on a PC
or not.
Open the "Change or Remove Programs" window by
selecting "Add or Remove Programs" in "Control
Panel".
The installed applications will be displayed in list
form.
Check if "Microsoft .NET Framework 1.1" is on the
list or not.
• When re-installing this software is needed, the exist-
ing software must be uninstalled first.