Installation
External Eq uipment Con nect,iions
- For optimum picture quality, adjust antenna direction.
Connecting
to an inside
Antenna
_tup
- Typical wall antenna jack used in apa_ment bui!dings, _nnect
the antenna cable as shown below.
Turn CloCkwise t° tightenl
Converter
- If you have a 75_ round cable, insert the bronze wire and then tighten the conn_tion
nut ff you have
a 300.Q flat wire, connect the twisted wire to the antenna converter and then connect the converter to
the antenna jack on the TV.
- ff using 7&Q round cable, do not bend the bronze wire. It may cause _or
picture quality.
Connecting
to an Outdoor
Antenna
Setup
This type of antenna is commonly used in single family dwellings
UHF
Antenna
VHF Antenna
Turn c_ockwise to tighten.
75_. Round Cable
Co
300£_Flat Wire
Single Family Home
Antenna
Antenna Jack
Converter
- In _or signal areas, to get better picture qual-
ity, install a signal amplifier to the antenna as
s_wn
to the righL
- if sigr,al n_s
to be split for two TVs, use an
antenna signal splitter for connection,,
12