LCD TV OWNER’S MANUAL MODELS: 15LC1R 20LC1R 23LC1R nformation anual Please read included together before reading this manual and operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Contents Installation Please set it up carefully so the product doesn’t fall over Location and function of controls Remote control handset Battery installation / Front/ Rear Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function On screen language selection On screen menus Menu selection...
Installation Unfolding the stand base 1. Place the set with its front facing downward on a cushion or soft cloth. 2. Hold down the release button inside the stand and strongly pull out the stand with your two hands. Note: Here shown may be somewhat different from your set. The stand won't move if you don't press release button.
Installation Connection of TV 75 Ω on the back. For the best reception an 1. Connect the aerial cable to the socket marked outdoor aerial should be used. 2. To connect an additional equipment, see the Connection of external equipment section. 3.
How to join the product assembly to the wall to How to join the product assembly to the wall to protect the set tumbling protect the set tumbling Please set it up carefully so the product doesn’t fall over. Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the top panel of the set. Only the remote control handset supplied will operate this set. Remote control handset Before you use the remote control handset, please install the MUTE...
Location and function of controls 11. POWER switches the set on from standby or off to standby. 12. I/II selects the language during dual language broadcast. 13. MENU selects a menu. MUTE POWER 14. PSM (Picture Status Memory) recalls your preferred picture setting. INPUT I/II 15.
Location and function of controls Front Top panel MENU INPUT (Programme Down/Up) 1. ON/OFF ( / I) selects a programme or a menu item. switches the set on from standby or off to switches the set on from standby. standby. 7.
Location and function of controls Rear 23LC1R only COMPONENT COMPONENT (VIDEO / AUDIO Input) PC SOUND ANTENNA 15/ 23LC1R INPUT PC INPUT INPUT JACK PC INPUT ANT IN ( 75 ) PC SOUND AV 1 AC INPUT S-VIDEO AV 2 HEADPHONE S-VIDEO AC INPUT...
Basic operation On and off 1. Press the POWER, , TV, INPUT or NUMBER buttons to switch it on fully. 2. Press the POWER button. The set reverts to standby mode. 3. Pull out mains plugs to switch the set off. Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is MUTE...
On screen menus Menu selection 1. Press the MENU button and then button to display each menu. 2. Press the button and then button to select a menu item. 3. Change the setting of an item in the sub or pull-down menu with button.
Setting up TV stations STATION Up to 100 TV stations can be stored by programme numbers (0 to 99). Auto programme Once you have preset the stations, you will be able to use the Manual programme or NUMBER buttons to scan the stations you have programmed. Programme edit Stations can be tuned using automatic or manual modes.
Setting up TV stations STATION Manual programme tuning Auto programme Manual programme Manual programme lets you manually tune and arrange the Programme edit stations in whatever order you desire. Also you can assign a station Favourite programme name with five characters to each programme number. 1.
Setting up TV stations Assigning a station name STATION 1. Repeat the ‘Manual programme tuning’ steps 1 to 2. Auto programme Manual programme button to select Name. 2. Press the button and then Programme edit 3. Press the button and then use the .
Setting up TV stations Programme edit STATION Auto programme This function enables you to delete or skip the stored programmes. Manual programme Also you can move some stations to other programme numbers or Programme edit Favourite programme insert a blank station data into the selected programme number. 1.
Setting up TV stations STATION Favourite programme Auto programme This function lets you select your favourite programmes directly. Manual programme Programme edit Press the MENU button and then button to select the Favourite programme STATION menu. to select Favourite 2. Press the button and then programme.
Picture adjustment PICTURE PSM (Picture Status Memory) 1. Press the MENU button and then button to select the PICTURE menu. Contrast Brightness 2. Press the button and then button to select PSM. Colour 3. Press the button and then button to select a picture set- Sharpness ting on the PSM menu.
Sound adjustment SSM (Sound Status Memory) SOUND You can select your preferred sound setting; Flat, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. Balance 1. Press the MENU button and then button to select the SOUND menu.
Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Display Mono MONO Stereo STEREO MUTE POWER Dual DUAL I TV/AV MULTIMEDIA I/II Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice.
TIME Menu Clock TIME Clock You must set the time correctly before using on/off time function. Off time On time 1. Press the MENU button and then button to select the D D / E E Auto sleep TIME menu. 2.
TIME Menu TIME Auto sleep Clock Off time If you select On on the Auto sleep menu, the set will automatical- On time Auto sleep ly switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1.
Other functions SPECIAL TV, AV and PC modes Language Input Inputs can be set for TV, AV or PC mode. AV mode is used when a Child lock video cassette recorder (VCR), or other equipment is connected to Power indicator the set.
Other functions SETUP Child lock Language Input The TV can be set so that the remote control handset is needed to Child lock control it. This feature can be used to prevent unauthorized view- Power indicator ing. 1. Press the MENU button and then button to select the SPECIAL menu.
Teletext - This feature is not available in all countries. Teletext (or TOP text) is an optional function, therefore only a set with the tele- text system can receive the teletext broadcast. Teletext is a free service broadcast by most TV stations which gives up-to-the- minute information on news, weather, television programmes, share prices and many other topics.
Teletext Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit num- ber using the NUMBER buttons in TOP mode. FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
Connection of external equipment You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. (- This part of Connection of external equipment mainly use pic- tures for the 23LC1R Aerial socket PC INPUT ANT IN ( 75 ) PC SOUND AV 1...
Connection of external equipment Euro scart socket (DVD) PC INPUT ANT IN ( 75 ) PC SOUND 1. Connect the Euro scart socket of the DVD to the Euro scart AV 1 S-VIDEO socket of the set. AV 2 2. Press the INPUT button to select AV1. 3.
Connection of PC PC in socket (15/23LC1R PC INPUT ANT IN ( 75 ) PC SOUND 1. Connect the signal cable from the monitor output socket of the AV 1 PERSONAL COMPUTER to the PC input socket of the set. S-VIDEO AV 2 2.
Connection of PC PC Setup (15/23LC1R SCREEN ARC * You can adjust auto configure, manual configure and reset as you Auto configure prefer. Manual configure Reset 1. Press the INPUT button and then button to select the RGB-PC. 2. Press the MENU button and then button to select the SCREEN menu.
Connection of PC Picture format (23LC1R only) You can watch TV in various picture formats; Full, 16:9, 14:9, Zoom, Spectacle, Original, 4:3. Repeatedly press the ARC button to select your desired picture format. Full When your TV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully.
roubleshooting Checklist roubleshooting Checklist The operation does not work normally. • Check to see if there is any object between the product and the remote control causing obstruction. The remote control • Are batteries installed with correct polarity (+ to +, - to -)? doesn’t work •...
Product Specifications Product Specifications Power Requirement/ 15LC1R * : AC100-240V~ 50/60Hz 0.8A / 40W 20LC1R * : AC100-240V~ 50/60Hz 1.2A / 65W Power Consumption 23LC1R * : AC100-240V~ 50/60Hz 1.4A / 120W 15LC1R * : 377.6mm x 242.8mm x 394.5mm Dimensions 14.9inches x 9.6inches x 15.5inches...