Cool - Samsung Neo Forte AVXWN Series User Manual

Cool

In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan
speed to feel cooler in hot season.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Mode button on the remote control until
Cool mode indicator appears on the remote control
display.
The air conditioner operates in Cool mode and it will
lower the temperature in your room.
When you press the Mode button, mode will change in order of Auto, Cool, Dry, Fan and
Heat.
3. Set the temperature.
Press the Temperature or  button on the
remote control to increase or decrease the desired
temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4. Set the fan speed.
Press the Fan Speed
to set the desired fan speed.
If room temperature reaches desired value, the air
conditioner will shut off cooling for a while and just the
fan runs.
When you press the Fan Speed
Medium and High.
• When you are using the remote control, make sure correct indicator which matches your
• Air flow can be adjusted manually. (See page 19 for instructions.)
• If current outside temperatures are much higher than the selected indoor temperature,
AVXWN｣ｪ｣ｪ_IB_E_29217.indd 15
& Set/Cancel button on the remote control.
button on the remote control
selection appears on the remote control display.
it may take time to bring the inner temperature to the desired coolness.
button, fan speed will change in order of Auto, Low,
operating _15
2008-02-28 ｿﾀﾈﾄ 1:36:19