Smtp (Email) - Honeywell HBD2PR1 User Manual

SMTP (Email)

Figure 3-26 SMTP Configuration Interface
Table 3-14 SMTP (Email) Configurations
Parameter
SMTP Server
Port
Anonymity
Username
Password
Sender
Authentication
Enable
Title
Attachment
Mail Receiver
Function
Enter the server address.
The default value is 25. You can modify this value as necessary.
Supports the anonymity function for the server. You can
automatically login anonymously. You do not need to enter the user
name, password, and the sender information.
The username for the sender's email account.
The password for the sender's email account.
The sender's email address.
This is the encryption mode. Select SSL, TLS, or None.
Subject: Enter the email subject here.
If you check this box, then the system can send out an email with
the snapshot picture.
Enter the receiver's email address here. You can add a maximum
of three addresses.
Web Operation | 65
800-18161 - A - 06/2014