Recording From An External Input; Recording From External Components; Recording From A Digital Camcorder - LG LGXBR446 Owner's Manual

Recording from an External Input

Recording from External Components

You can record from an external component, such as a
camcorder or VCR, connected to any of the VCR/DVD
Recorder's external inputs.
Make sure that the component you want to
1 1
record from is connected properly to the
VCR/DVD Recorder. See page 19.
Press INPUT repeatedly to select the external
2 2
input to record from.
• AV1: Audio/Video Input mounted on back panel
• AV2: Audio/Video Input mounted on front panel
• DV: DV Input mounted on front panel
ote
Check that the Audio In settings DV Record Audio are
as you want them. See page 23.
Load a recordable disc or tape.
3 3
Set a recording mode as necessary by pressing
4 4
REC MODE repeatedly.
DVD: XP (High quality), SP (Standard quality), LP
(Low quality), EP (Extend quality).
VCR: SP (Standard Play), SLP (Super Long Play)
Press z REC once.
5 5
Recording will start. (The REC indicator lights in the
display window.)
Recording continues until you press STOP (
disc is full.
To record for a fixed length of time, see Instant Timer
Recording on page 44.
Press STOP (x) to stop recording.
6 6
ote
If your source is copy-protected using CopyGuard, you will not
be able to record it using this recorder. See Copyright on page
10 for more details.

Recording from a Digital Camcorder

You can record from a digital camcorder connected to
the DV IN jack on the front panel of this VCR/DVD
Recorder. You can use the VCR/DVD Recorder's
remote to control both the camcorder and the VCR/DVD
Recorder. Before recording, make sure that the audio
input for the DV IN jack is set up (see page 26).
ips
• The source signal must be DVC-SD format.
• Some camcorders cannot be controlled using the
VCR/DVD Recorder remote.
• If you connect a second DVD recorder using a DV
cable, you cannot control the second recorder from
this one.
• You cannot control the VCR/DVD Recorder remotely
from a component connected to the DV IN jack.
• You cannot record date and time information from a
DV cassette.
Make sure your digital camcorder is connected
1 1
to the front panel DV IN jack. See page 19.
Check that the DV audio input is as you require.
2 2
You can choose between Audio 1 (original audio) and
Audio 2 (overdubbed audio).
• DV Input is set from the DV Record Audio in sub-menu
of the General menu. See DV Record Audio on page 26
for more information.
Press INPUT repeatedly to select the DV input.
3 3
x
) or the
DV appears in the display window.
Find the place on the camcorder tape from
4 4
which you want to start recording.
For best results, pause playback at the point from which
you want to record.
• Depending on your camcorder, you can use this
VCR/DVD Recorder's Remote Control to control the
camcorder using the STOP, PLAY and PAUSE func-
tions.
Press z REC once to start recording.
5 5
• Recording is automatically stopped if the recorder
detects no signal.
• You can pause or stop the recording by pressing
PAUSE/STEP or STOP. You cannot control the cam-
corder from this Remote Control during recording.
• In Video mode, the final frame of the recording may
remain displayed on screen for a while after recording
stops.
47