Connecting To A Tv - LG LGXBR446 Owner's Manual

Connections (Continued)

Connecting to a TV

Make one of the following connections, depending on
the capabilities of your existing equipment.
RF coaxial connection
Connect the RF.OUT jack on the VCR/DVD Recorder to
the antenna in jack on the TV using the 75-ohm Coaxial
Cable supplied (R).
ote
If you use this connection, tune the TV to the VCR/DVD
Recorder's RF output channel (CH 3 or 4).
How to set the VCR/DVD Recorder's RF output
channel
When the VCR/DVD Recorder is turned off, press and
hold CH (v/V) on the front panel for about five
seconds to change the RF output channel (CH 03 or
CH 04). "RF-03" or "RF-04" appears in the display win-
dow.
Audio/Video connection
Connect the VIDEO OUT jack on the VCR/DVD
1 1
Recorder to the video in jack on the TV using the
video cable (V).
Connect the Left and Right AUDIO OUT jacks from
2 2
the VCR/DVD Recorder to the audio left/right in
jacks from the TV using the audio cables (A).
Rear of TV
ANTENNA S-VIDEO VIDEO
INPUT INPUT INPUT
S V
R
Rear of VCR/DVD Recorder
COMPONENT/PROGRESSIVE VIDEO INPUT
AUDIO INPUT
Y
Pr Pb
R
L
A C
S-Video connection
Connect the S-VIDEO OUT jack on the VCR/DVD
1 1
Recorder to the S-Video in jack on the TV using the
S-Video cable (S).
Connect the Left and Right AUDIO OUT jacks from
2 2
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the audio cables (A).
Component Video (Color Stream
Connect the COMPONENT/PROGRESSIVE SCAN
1 1
VIDEO OUT jacks on the VCR/DVD Recorder to
the corresponding in jacks on the TV using an Y Pb
Pr cable (C).
Connect the Left and Right AUDIO OUT jacks from
2 2
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the audio cables (A).
Progressive Scan (ColorStream
If your television is a high-definition or "digital ready"
television, you may take advantage of the VCR/DVD
Recorder's progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the VCR/DVD Recorder.
Connect the COMPONENT/PROGRESSIVE SCAN
1 1
VIDEO OUT jacks on the VCR/DVD Recorder to
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks from
2 2
the VCR/DVD Recorder to the audio left/right in
jacks on the TV using the supplied audio cables
(A).
otes
Set Progressive Scan option to "ON" in the General
menu, see page 22.
Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
® ) connection
pro) connection
®
17