Electrical Requirements - Whirlpool MH7135XE Use And Care Manual

Whirlpool mh7135xe microwave oven
Hide thumbs Also See for MH7135XE:
Table of Contents

Advertisement

Electrical
requirements
Observe all governing codes
and ordinances.
A 120 Volt, 60 Hz. AC only, 20 amp fused
electrical supply is required. (A time-delay
fuse is recommended.) It is recommended
that a separate circuit serving only this
appliance be provided.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
GROUNDING INSTRUCTIONS
For all cord connected
appliances:
The microwave oven must be grounded. In
the event of an electrical short circuit,
grounding
reduces the risk of electric shock
by providing an escape wire for the electric
current. The microwave oven is equipped
with a cord having a grounding wire with a
grounding
plug. The plug must be plugged
into an outlet that is properly installed
and grounded.
WARNING:
Improper use of the
grounding
can result in a risk of
electric shock.
Consult a qualified electrician or service-
man if the grounding instructions are not
completely understood, or if doubt exists as
to whether the microwave
oven is properly
grounded.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician
or serviceman
install an outlet
near the microwave
oven.
For a permanently
connected
appliance:
This appliance must be connected
to
a grounded,
metallic, permanent wiring
system, or an equipment
grounding
con-
ductor should be run with the circuit
conductors
and connected
to the equip-
ment grounding
terminal or lead on the
appliance.

Advertisement

Table of Contents
loading

Table of Contents