Table of Contents
Advertisement
Charcoal
filter
:
To remove:
1.
Remove
the vent cover mounting screws.
2. Tip
the cover forward, then
lift out to
remove.
3.
Lift
the back of the charcoal filter.
Slide
the filter straight out.
To replace:
1
. Slide
a new charcoal filter into place. The
filter should rest at the angle shown.
2. Slide
the bottom of the vent cover into
place.
Push
the top until it snaps into
place. Replace
the mounting screws.
After
replacing
filters:
l
Turn
the power back on at the main power
supply.
l
Do not operate
the hood without the
filters in place.
47
Advertisement
Table of Contents
