Unpacking the Amadeus MK II
We recommend the use of the white gloves provided when handling the plinth and platter
assemblies.
Take care that none of the fluids contaminate the finished surfaces of your Amadeus MK II.
The Amadeus MK II packaging has been designed to protect it from the hazards of shipping. It is
advisable to save it for further use.
Important: Never place a Well Tempered Lab turntable in direct sunlight. Not only will it have
detrimental effects on your valuable recordings, it will impair the mechanical integrity and
performance of your turntable.
Assembly
For ease of assembly we recommend a flat work surface, such as a table or bench. All necessary
tools have been provided.
1. Install bearing cup in plinth adjust to approx 40mm (1.6in) above plinth and tighten set screw. See
Fig (1).
Fig (1)
2. Install tonearm suspension pillar to approx 95mm (3.8in) above plinth and tighten set screw.
Complete with tonearm suspension rod. See Fig (2).
Fig (2)
3
Need help?
Do you have a question about the Amadeus MK II and is the answer not in the manual?