Connecting An Antenna Or Cable Tv; Connections To Your Tv - LG LRA-516 Owner's Manual

Connecting an Antenna
Connecting an Antenna
or Cable TV
or Cable TV
a a Antenna
:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT.IN on your Recorder. If your antenna cable is flat
connect it to a 300-ohm to 75-ohm antenna adaptor
(not supplied) and slip the adaptor over the ANT.IN
jack. Don't attempt to screw it into to the Recorder.
b b Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the Recorder. If a con-
verter is required connect a coaxial cable from the
wall jack to the IN connector on the converter, and a
coaxial cable from the OUT connector on the convert-
er to the ANT.IN on your Recorder. This cable hookup
permits both TV and Recorder operation.
a
Antenna
OR
b
To view or record a CATV channel
1. Tune the TV to the Recorder output channel (CH
3 or 4).
2. Set the Recorder channel selector to the cable
output channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
With this connection, you cannot record one program
•
while viewing another.
If you are using a cable box to tune channels, it is not
•
necessary to do Auto Channel Set.

Connections to your TV

Connections to your TV
Make one of the following connections, depending on
the capabilities of your TV.
Antenna
RF coaxial connection
Connect the RF.OUT jack on the Recorder to the
antenna in jack on the TV using the supplied 75-ohm
OR
Coaxial Cable (R).
How to set the Recorder's RF output channel
1. When the Recorder is turned off, press and hold
2. Tune the TV to this channel.
Video connection
Connect the VIDEO OUT jack on the Recorder to the
video in jack on the TV using the video cable sup-
plied (V).
Note:
If you use this connection, set the TV's source selector to
VIDEO.
S-Video connection
Connect the S-VIDEO out jack on the Recorder to the
S-Video in jack on the TV using the optional
S-Video cable (S).
Rear of TV
ANTENNA VIDEO
S-VIDEO
AUDIO INPUT
INPUT
INPUT
INPUT
L R
S
R A V
CH (V/v) on the front panel for more than five
seconds to change the RF output channel (ch03
or ch04). [ch03] or [ch04] appears in the display
window.
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
Y Pb Pr
C
Rear of the recorder
15