Connecting An Antenna Or Cable Tv - LG LRA-850 Owner's Manual

Connecting an Antenna
or Cable TV
a Antenna a
:
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANTENNA IN on your Recorder. If your antenna cable
is flat connect it to a 300-ohm to 75-ohm antenna
adaptor (not supplied) and slip the adaptor over the
ANTENNA IN jack. Don't attempt to screw it into to the
Recorder.
b Cable TV: b
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANTENNA IN jack on the Recorder.
If a converter is required connect a coaxial cable from
the wall jack to the IN connector on the converter, and
a coaxial cable from the OUT connector on the
converter to the ANTENNA IN on your Recorder. This
cable hookup permits both TV and Recorder
operation.
To view or record a CATV channel
1. Tune the TV to the Recorder output channel (CH 3
or 4).
2. Set the Recorder channel selector to the cable
output channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
With this connection, you cannot record one channel
•
while viewing another.
If you are using a cable box to tune channels, it is not
•
necessary to do Auto Channel Set.
a
Antenna
OR
Rear of Recorder
b
Antenna
OR
11