Initial Setup Wizard - LG DR787T Owner's Manual

Initial Setup W izard
Initial Setup W izard
After the POWER is pressed for the first time to turn
on the unit, the Initial Setup Wizard function sets the
Language, Channels and Clock step-by-step until the
setup is complete.
1. Use v / V to select a language for the Setup
menu and information display then press ENTER.
2. Check your antenna connections.
Press B to move next step.
3. Select the [Tuning Band] option then press B .
TV is for over-the-air antenna reception.
CATV is for cable subscribers.
4. Press ENTER to begin the channel search.
You can skip the analog channel scanning by
pressing B.
5. Enter the necessary information for date, year and
time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
Press ENTER to confirm your setting.
6. Press ENTER to exit the menu.
Note:
You can reset the Initial Setup Wizard from the
[Factory Set] in the setup menu. (see page 21).
19