S E T T I N G U P T H E M A X P R O N V R
2
Settings for the MAXPRO NVR Software-Only Solution
Settings for the MAXPRO NVR Software-
Only Solution
Setting up the MAXPRO NVR server and client computers is the first phase in the
commissioning process.
Before you Begin
Determine the following at the location.
Hardware Specifications
The MAXPRO NVR server and client computers must meet the minimum hardware
specifications, refer to the
MAXPRO NVR Software System Architecture
MAXPRO NVR Standalone System
The following figure illustrates the MAXPRO NVR Standalone system.
Figure 2-4
26
•
Number of server and client computers.
•
Hardware configuration of the computers.
•
Number of peripheral devices such as joystick controllers (Ultrakey keyboard), and
other devices.
MAXPRO NVR Software Data Sheet
MAXPRO NVR Standalone System
for more information.
MAXPRO NVR Commissioning and Installation Guide