Technical Details - Beltronics 928i Vector Owner's Manual

Details of Programming
City Mode Sensitivity
(Standard)
City STD
In this setting,when you put your V928i in
the City mode,X-band sensitivity is
significantly reduced,to reduce annoyance
from X-band intrusion alarms and motion
sensors.(factory default)
City LoX (Low X band sensitivity)
In this setting,when you put your V928i in
the City mode,X-band sensitivity is reduced
more than the standard setting.This will
reduce X-band alarms from other sources
even further,but also significantly reduces
range to X-band traffic radar.
Bands
BandsDFT
In this setting,all North American radar and
laser frequencies are monitored.This is the
factory setting and it is recommended that
you use your V928i in this mode.
BandsMOD
In this setting,your V928i will warn you
with an audible alert,and associated text
message stating which band has changed
from the original factory setting (i.e."SWS
ON").This warning is displayed during the
start up sequence (standard or fast).
14

Technical Details

Features and Specifications
Operating Bands
• X-band 10.475-10.575 GHz ±25 MHz
• K STD,or K PULS,or K HYPR,or K OFF
K Standard:23.950-24.250 GHz ±100 MHz
K Pulse:Detects K STD with Rapid K
Pulse (ISKRA)
K Hyper:Detects K STD,K Pulse,and
Low Power K source
• Ka-band 33.400-36.110 GHz ±1300 MHz
• POP 33.725-33.875 GHz ±1300 MHz
• Laser 904nm with 5 KHz Pulse,
33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne,VTO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Sensor Diodes
Display Type
• 280 LED Alphanumeric
• Bar Graph
• 3 Levels of Brightness,plus Dark Mode
Power Requirement
• 12VDC,Negative Ground
• Power cord (included)
Programmable Features
• Power-On Indication
• Voice Alerts
• Power-On Sequence
• AutoMute
• City Mode Sensitivity
• Bands
Sensitivity Control
• Highway and City
Auto Calibration Circuitry
VG2 Immunity
Dimensions (Inches)
• 1.25 H x 2.75 W x 4.75 L
15