Overview Of Programming - Beltronics 928i Vector Owner's Manual

Overview of Programming

Press the RVW button
to go from one category
to the next
PILOT
Pilot HWY
(Power-on indication) Pilot H
VOICE Voice ON
Voice OFF
POWER-ON SEQUENCE PwrOn STD
PwrOn FST
AUTOMUTE
aMute ON
aMute OFF
CITY MODE SENSITIVITY City STD
City LoX
BANDS Bands DFT
Bands MOD
*
Factory Default Settings
To reset your V928i to its original
factory settings,press and hold the
"CITY"and"BRT"buttons while
turning the power on.The V928i's
display will provide a Reset
message,accompanied by an audible
alert,acknowledging the reset.
Press the CHG button
to change your setting
within a category
*Full word:Highway or City
Letter:H or C
*Voice alerts on
Voice alerts off
*Standard power-on sequence
Fast power-on sequence
*AutoMute on
AutoMute off
*Standard City mode sensitivity
Low X band sensitivity in City Mode
*Factory default settings
Factory default settings modified
Turn bands"ON"or"OFF"by
pressing the VOLUME/MUTE button
X ON or OFF (default is OFF)
K K STD (default)
(STD + ISKRA)
K Puls
K Hyper (STD + K Pulse + K Low)
Ka ON or OFF (default is ON)
POP ON or OFF (default is OFF)
Laser ON or OFF (default is ON)
SWS ON or OFF (default is OFF)
12
Details of Programming
Pilot (Power-on indication)
NOTE:When you are using the Dark
mode,the display will only show HD or CD
(Highway-Dark or City-Dark).
(Full description)
Pilot HWY
In this setting,your V928i will display
"Highway"or"City"as its power-on
indication.(factory default)
Pilot H (Letter)
In this setting,your V928i will display"H"
for Highway and"C"for City.
Voice
Voice On (Voice announcements on)
In this setting,all radar,laser,and SWS
messages (if programmed) will be
announced using a digital voice.
Voice Off (Voice announcements off)
In this setting,only the distinct audio tone
will be heard when a radar,Laser,or SWS
message is detected.
Power-on Sequence
(Standard)
PwrOnSTD
In this setting,each time you turn on your
V928i,it will display"BEL V928i,""Laser,""Ka-
band,""K-band,""X-band,""Safety,"followed
by a brief X-band alert.(factory default)
If any bands have been changed from
the factory default settings,a double X-band
tone and corresponding message
(i.e."SWS ON"),will alert you that one or
more bands have been changed.
(Fast power-on)
PwrOnFST
In this setting,your V928i will provide a
single X-band tone.If any bands have been
changed from the factory default settings,
a double X-band tone and corresponding
message (i.e."SWS ON"),will alert you that
one or more bands have been changed.
AutoMute
aMute ON (AutoMute on)
In this setting,your V928i's audio alerts will
initially be at the volume you set,but after
a few seconds,the V928i will automatically
reduce the volume level,to keep you
informed,but not annoyed.(factory default)
aMuteOFF (AutoMute off)
With AutoMute off,your V928i's audio alerts
will remain at the volume you set for the
duration of the radar encounter.
13