Beltronics 928i Vector Owner's Manual page 4

Quick Reference Guide
To begin using your V928i,
just follow these simple steps
1
Plug the small end of the power cord
into the side jack of the detector,and
plug the large end of the power cord
into your car's lighter socket.
2
Mount your V928i on the windshield
using the supplied windshield mount.
3
Press the PWR button,located top left,
to turn the V928i on.
4
Press and hold the Volume/Mute
button to adjust the volume.
Please read the manual to fully understand
your V928i's operation and features.
QuickMount Slot
Insert the V928i's adjustable Windshield
mount into this slot. Page 7
QuickMount Button
Press the button,and slide the Windshield
mount into one of its four locking positions.
Page 7
City Button
Switches between City and Highway,
settings.In general,we recommend
Highway.Page 9
Power
Press the PWR button to turn the V928i on
or off.
AutoMute
Your V928i's patented AutoMute
automatically reduces the volume level of
the audio alert after a brief period.If you
prefer,you can turn AutoMute off. Page 8
Programming
Your V928i is ready to go,just plug it in and
turn it on.But you can also easily change 6
features for your preferences. Page 12-14
4
Radar Antenna and Laser Lens
The rear panel of your V928i should have
a clear view of the road ahead.For best
performance,do not mount the V928i
directly behind windshield wipers
or tinted areas. Page 6
Alphanumeric Matrix Display
Your V928i's display will show Highway
or City as its power-on indication.If you
prefer,you can choose other power-on
indications. Page 12-14
During an alert,the display will indicate
radar band,and a precise bar graph of signal
strength.Page 10
NOTE:In the Dark Mode the display
will not light during an alert. Page 9