Routing Table - Gnet IP104 User Manual

4.7.4 Routing Table

Routing Tables allow you to determine which physical interface address to use for outgoing
IP data grams. If you have more than one routers and subnets, you will need to enable routing
table to allow packets to find proper routing path and allow different subnets to communicate
with each other.
Routing Table settings are settings used to setup the functions of static and dynamic routing.
Static Routing: For static routing, you can specify up to 8 routing rules. You can
enter the destination IP address, subnet mask, gateway, hop for each routing rule, and
then enable or disable the rule by checking or unchecking the Enable checkbox.