Mounting On A Wall - LG 22LY560M Owner's Manual

12
ASSEMBLING AND PREPARING

Mounting on a Wall

An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand wall mount. When you do not
use LG's wall mount bracket, please use a wall
mount bracket where the device is adequately
secured to the wall with enough space to allow
connectivity to external devices.
10 c m
(4 in c h e s )
1 0 c m
10 c m
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
Model 22LY560M
VESA (A x B)
75 x 75
A
B
Standard screw
M4
Number of screws 4
Wall mount bracket
LSW140
(optional)
Model 32LY560M
VESA (A x B)
200 x 200
A
B
Standard screw
M6
Number of screws 4
Wall mount bracket LSW240B
(optional) MSW240
•Disconnect the power before moving or
installing the TV. Otherwise electric shock
may occur.
•If you install the TV on a ceiling or slanted
wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel. When using a third-party wall
mount, it is not covered by the warranty.
•Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
•Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
•Screw length from outer surface of back
cover should be under 8 mm.
(For 22/28LY560M)
1 0 c m
28LY560M
100 x 100
M4
4
LSW140
42LY560M
400 x 400
M6
4
LSW440B
MSW240
CAUTION
Wall Mount Pad
Back Cover
Wall Mount Pad
Back Cover
Standard screw
: M4 x L10
Max. 8 mm