Connections To Your Tv - LG BH100 Owner's Manual

BH100-N-AA1ULL-ENG 4/6/07

Connections to Your TV

Make one of the following connections, depend-
ing on the capabilities of your existing equipment.
Tips
Depending on your TV and other equipment you
wish to connect, there are various ways you
could connect the player. Use only one of the
connections described below.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
Caution
– Make sure the player is connected directly to the
TV. Tune the TV to the correct video input chan-
nel.
– Do not connect the player's AUDIO OUT jack to
the phono in jack (record deck) of your audio sys-
tem.
– Do not connect your player via your VCR. The
DVD image could be distorted by the copy protec-
tion system.
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on the
TV using Y Pb Pr cables (C).
Tip:
When you use COMPONENT VIDEO OUT connec-
tion, you can change the resolution for the output.
(Refer to "Resolution setting" on page 16.)
Video Connection
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable (V).
Audio (Left/Right) Connection
Connect the left and right AUDIO OUT jacks of the
player to the audio left and right IN jacks on the TV
using the audio cables (A). Do not connect the play-
er's AUDIO OUT jack to the phono in jack (record
deck) of your audio system.
Note:
For this audio connection, set the [Speaker Out]
option to [2CH] on the setup menu. (See page 18.)
14
12:02 PM Page 14
Rear of TV
VIDEO
AUDIO INPUT
INPUT
L R
A V
COMPONENT
VIDEO OUT
L FRONT R
Y
2CH
AUDIO
VIDEO
OUT
OUT
P
B
DIGITAL
5.1CH
AUDIO OUT
AUDIO
OUT
L R
REAR
P
R
CENTER WOOFER COAXIAL OPTICAL
Rear of the player
COMPONENT VIDEO INPUT
Y Pb Pr
C
HDMI OUT
SERVICE
(1080p)