Connect; Auto Scan; Disconnect - Pretec BluetoothGPS User Manual

5.2.4. Connect

Connect to the BluetoothGPS device. When you try to connect to
Bluetooth enabled device, the window shown as Figure 1 will appear.
And it means connecting successful when you see Figure 2 appears.
If the window is shown as Figure 3, it means the connection failed, please
try again.

5.2.5. Auto Scan

Automatically scans the BluetoothGPS COM Port and baud rate in order
to connect BluetoothGPS device.

5.2.6. Disconnect

Disconnect to the BluetoothGPS device.
Note:
When perform Auto Scan, user has to wait for a while because it will take time
to get necessary system information from BluetoothGPS.
Figure 1
Figure 2
32
Figure 3