Navigation Page; Nmea Mode / Sirf Mode; Degraded Mode; Elevation Mask - Pretec BluetoothGPS User Manual

4.2. Navigation Page

You can set GPS-relative parameters by this dialog.

4.2.1. NMEA Mode / SiRF Mode

Display (or change) the mode of device.
Setup the parameters of in NMEA Mode or SiRF Mode.

4.2.2. Degraded Mode

Enable or disable degraded mode.

4.2.3. Elevation mask

Elevation mask setting.

4.2.4. DOP Mask

DOP mask type and DOP mask value setting.

4.2.5. SBAS Mode

Enable or disable SBAS function.

4.2.6. Default

Reset values of this dialog into default value. It has not changed the setting
of device yet. You still need to push OK button if you want to change the
setting of device.
4.2.7. OK
Upload the parameters to the BluetoothGPS.
19